100% Lash Bonding

Lashes not lasting ... industry tips to ensure your clients eyelash extensions are applied to last the

entire lifecycle of the eyelash

1. The glue needs to be shaken for at least 1 minute before procedures and disregard the first drop of glue

2. Draw the lash extension through the glue from about 2/3 down right to the end, Then stroke the lash extensions over the lash a couple of times to coat it with the adhesive before you place the lash, as this may effect the bond if not done. Remember to blend any excess away

3. Make sure you use sufficient glue, being too sparing with the glue can result in lashes not lasting, too much can result in the lashes clumping together. The Lash most be 100% bonded otherwise the lashes will not last. The lash base connecting point must be perfectly bonded. If a repair is necessary it needs to be done quickly. Once the glue is dry it will be impossible to repair. It should be difficult to identify the Lash on the natural lash when bonded correctly.

IT REALLY IS ALL IN THE BONDING!